====== Hot air rework-station 01 ======

^ QR-ID    | HQR241      |
^ Navn  | Hot air rework-station 01 |  
^ Kort beskr.    | Varmlufts loddekolbe |
^ Indehaver | HAL9k - Doneret af [[members:larsjuelnielsen]] |
^ Tilladt brug | Use allowed. Please read user manual or at least notes below BEFORE use. |\\

User manual [[http://www.allendale-stores.co.uk/pcb/manuals/aoyue_852a+_852a++.pdf | link]]\\

**Specifications**
^ Voltage Input | 230v |
^ Power Consumption | 500W (max) |
^ Hot Air Temperature Range | 100°C - 550 °C |
^ Heating Element | Metal Heating Core |
^ Pump / Motor Type | Diaphragm pump |
^ Air Capacity | 23 L/min (max) |
^ Station Dimensions | Width: 188mm x Height: 127mm x Depth: 244mm |
^ Weight | 3.7 Kg |

Bruges med loddepasta ved pålodning.

EFTER BRUG: Sluk for varme elementet på den store sorte knap og VENT til den bliver stille før du tager strømmen fra eller slukker på den røde knap, ellers risikerer du at varme legemet bliver ødelagt!!!

Knapper under venstre display: Temperatur indstilling(Celsius).
Knapper under højre display: Luft hastighed.

spec: [[http://www.aoyue.com/en/ArticleShow.asp?ArticleID=383|link]] and [[http://www.pcb-soldering.co.uk/aoyue-852a-smd-rework-station.html|buy]] Manual: [[http://sra-solder.com/shopimages/products/instructions/Aoyue852A++.pdf|Link]]