====== 3DPrinterPC ======

^ QR-ID    | HQR1016 |
^ Navn    | 3DPrinterPC |
^ Kort beskr.    | PC til at lave G-code filer til 3D-printerne |
^ Indehaver    | HAL9k |
^ Tovholder    | [[members:andersv209]] |
^ Tilladt brug    | No hacking allowed. Alm. brug tilladt |
^ Placering    | Er monteret på border i lasersaurgrotten |

{{:equipment:3dprinterpc.jpg?direct&400|}}

===== Info =====
 
3Dprinter PC'en er beregnet til at slice dine STL-filer til G-code filer som 3D-printerne forstår. 

Cura er installeret samt opsat til [[equipment:3dprinting:lulzbot-taz]] og [[equipment:3dprinting:ultimaker]]. 

PCen kører Lubuntu -- password står på skærmen.

===== Kiosk Mode =====

Settings in Cura are reset every time Cura is launched from the desktop.

  * If the default settings are incorrect, or Cura needs to be updated, ask in #3dprinter on Slack

Material must always be set to “Hal9k PLA”

  * Otherwise, retraction settings will cause blockage. 
  * Use only 3 mm or less retraction distance with both printers.

The PC installs updates and reboots at 4 AM, every day.

https://github.com/Hal9k-dk/cura-kiosk