====== Switch setup i Hal9k ======
//Denne side er begrænset til læsning for almindelige brugere//

[[https://downloads.dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_powerconnect/powerconnect-5448_reference%20guide_en-us.pdf|Link til manualen til switchene]]

I krydsfeltet er der 2 Dell-switche. Noter fra opsætning:

<code>
en
conf
hostname sw1.hal9k.dk
vlan database
vlan 901
vlan 902
vlan 903
vlan 904
vlan 905
exit
interface vlan 901
name outside
exit
interface vlan 902
name "Wireless network"
exit
interface vlan 903
name "Cabled network"
exit
interface vlan 904
name "Server network"
exit
interface vlan 905
name "bmx-klubben"
exit

enable password CHANGEME
interface vlan 904
ip address 10.42.4.2 255.255.255.0
ipv6 enable
ipv6 address 2001:16d8:dd56:4::2/64
exit

ipv6 default-gateway fe80::20c:29ff:fe9e:fc49

interface range ethernet all
port storm-control broadcast enable
port storm-control broadcast rate 50000
switchport mode access
switchport access vlan 903
spanning-tree portfast
exit

interface ethernet g44
switchport mode access
switchport access vlan 904
exit
interface ethernet g45
switchport mode access
switchport access vlan 902
exit
interface ethernet g46
switchport mode access
switchport access vlan 901
exit
interface ethernet g47
switchport mode trunk
switchport trunk allowed vlan add 901
switchport trunk allowed vlan add 902
switchport trunk allowed vlan add 903
switchport trunk allowed vlan add 904
switchport trunk allowed vlan add 905
exit

interface ethernet g48
switchport mode trunk
switchport trunk allowed vlan add 901
switchport trunk allowed vlan add 902
switchport trunk allowed vlan add 903
switchport trunk allowed vlan add 904
switchport trunk allowed vlan add 905
exit

snmp-server location "Sofiendalsvej 80, 9220 Aalborg Oest, Denmark"
snmp-server community public
snmp-server contact "bestyrelsen@lists.hal9k.dk"
snmp-server enable

copy running-config startup-config
y




dir
copy tftp://10.42.4.123/image.ros image
copy tftp://10.42.4.123/image.rfb boot
show bootvar
boot system image-2
show bootvar
y

############################
In webinterface:
System -> Management Security -> Enable Password     (change the pw)
System -> Management Security -> Local user Database    (change the pw)

</code>