Differences

This shows you the differences between two versions of the page.

--- equipment:3dprinting:3dprinterpc [2015/08/03 10:07] – external edit 127.0.0.1
+++ equipment:3dprinting:3dprinterpc [2022/05/01 10:49] (current) – Lars Christensen
@@ Line 2: / Line 2: @@
 ^ QR-ID    | HQR1016 |
-^ Navn  | 3DPrinterPC |
+^ Navn    | 3DPrinterPC |
 ^ Kort beskr.    | PC til at lave G-code filer til 3D-printerne |
-^ Indehaver | HAL9k |
+^ Indehaver    | HAL9k |
-^ Tovholder | [[members:andersv209]] |
+^ Tovholder    | [[members:andersv209]] |
-^ Tilladt brug | No hacking allowed. Alm. brug tilladt |
+^ Tilladt brug    | No hacking allowed. Alm. brug tilladt |
-^ Placering | Er placeret på hjørnet af arbejdsbordet i fællesrum |
+^ Placering    | Er monteret på border i lasersaurgrotten |
 {{:equipment:3dprinterpc.jpg?direct&400|}}
@@ Line 15: / Line 15: @@
 Dprinter PC'en er beregnet til at slice dine STL-filer til G-code filer som 3D-printerne forstår.
-Cura version 15.04.02 er installeret samt opsat til [[equipment:lulzbot-taz]] og [[equipment:ultimaker]].
+Cura er installeret samt opsat til [[equipment:3dprinting:lulzbot-taz]] og [[equipment:3dprinting:ultimaker]].
+PCen kører Lubuntu -- password står på skærmen.
+===== Kiosk Mode =====
+Settings in Cura are reset every time Cura is launched from the desktop.
+  * If the default settings are incorrect, or Cura needs to be updated, ask in #3dprinter on Slack
+Material must always be set to “Hal9k PLA”
+  * Otherwise, retraction settings will cause blockage.
+  * Use only 3 mm or less retraction distance with both printers.
+The PC installs updates and reboots at 4 AM, every day.
+https://github.com/Hal9k-dk/cura-kiosk
-PCen kører Lubuntu 14.10 -- password står på skærmen.

User Tools

Site Tools

Differences

Page Tools