Differences

This shows you the differences between two versions of the page.

--- infrastruktur:it-services:netvaerk:switch_setup [2013/04/01 00:19] – Georg Sluyterman
+++ infrastruktur:it-services:netvaerk:switch_setup [2013/04/08 15:47] – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
+====== Switch setup i Hal9k ======
+//Denne side er begrænset til læsning for almindelige brugere//
+I krydsfeltet er der 2 Dell-switche. Noter fra opsætning:
+<code>
+en
+conf
+hostname sw1.hal9k.dk
+vlan database
+vlan 901
+vlan 902
+vlan 903
+vlan 904
+vlan 905
+exit
+interface vlan 901
+name outside
+exit
+interface vlan 902
+name "Wireless network"
+exit
+interface vlan 903
+name "Cabled network"
+exit
+interface vlan 904
+name "Server network"
+exit
+interface vlan 905
+name "bmx-klubben"
+exit
+enable password CHANGEME
+interface vlan 904
+ip address 10.42.4.2 255.255.255.0
+ipv6 enable
+ipv6 address 2001:16d8:dd56:4::2/64
+exit
+ipv6 default-gateway fe80::20c:29ff:fe9e:fc49
+interface range ethernet all
+port storm-control broadcast enable
+port storm-control broadcast rate 50000
+switchport mode access
+switchport access vlan 903
+spanning-tree portfast
+exit
+interface ethernet g44
+switchport mode access
+switchport access vlan 904
+exit
+interface ethernet g45
+switchport mode access
+switchport access vlan 902
+exit
+interface ethernet g46
+switchport mode access
+switchport access vlan 901
+exit
+interface ethernet g47
+switchport mode trunk
+switchport trunk allowed vlan add 901
+switchport trunk allowed vlan add 902
+switchport trunk allowed vlan add 903
+switchport trunk allowed vlan add 904
+switchport trunk allowed vlan add 905
+exit
+interface ethernet g48
+switchport mode trunk
+switchport trunk allowed vlan add 901
+switchport trunk allowed vlan add 902
+switchport trunk allowed vlan add 903
+switchport trunk allowed vlan add 904
+switchport trunk allowed vlan add 905
+exit
+snmp-server location "Sofiendalsvej 80, 9220 Aalborg Oest, Denmark"
+snmp-server community public
+snmp-server contact "[email protected]"
+snmp-server enable
+copy running-config startup-config
+y
+dir
+copy tftp://10.42.4.123/image.ros image
+copy tftp://10.42.4.123/image.rfb boot
+show bootvar
+boot system image-2
+show bootvar
+y
+############################
+In webinterface:
+System -> Management Security -> Enable Password     (change the pw)
+System -> Management Security -> Local user Database    (change the pw)
+</code>

User Tools

Site Tools

Differences

Page Tools