User Tools
Site Tools
projects:bungard-grbl
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
projects:bungard-grbl [2018/07/19 22:22] Lars Christensen |
projects:bungard-grbl [2018/07/22 16:26] (current) Anders Vestergaard [GRBL Configuration] |
||
|---|---|---|---|
| Line 80: | Line 80: | ||
| | $31=0 | Min spindle speed, RPM | | | $31=0 | Min spindle speed, RPM | | ||
| | $32=0 | Laser mode, boolean | | | $32=0 | Laser mode, boolean | | ||
| - | | $100=80.000 | X steps/mm | 80 at quartermicrostep | | + | | $100=78.740 | X steps/mm | 80 at quartermicrostep | |
| - | | $101=80.000 | Y steps/mm | 80 at quartermicrostep | | + | | $101=78.740 | Y steps/mm | 80 at quartermicrostep | |
| - | | $102=71.000 | Z steps/mm | 71.0 at quartermicrostep | | + | | $102=78.740 | Z steps/mm | 71.0 at quartermicrostep | |
| | $110=800.000 | X Max rate, mm/min | | | $110=800.000 | X Max rate, mm/min | | ||
| | $111=800.000 | Y Max rate, mm/min | | | $111=800.000 | Y Max rate, mm/min | | ||
Permalink projects/bungard-grbl.1532038942.txt.gz · Last modified: 2018/07/19 22:22 by Lars Christensen
oeffentlich
