This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revision | |||
projects:bungard-grbl [2018/07/20 00:22] – Lars Christensen | projects:bungard-grbl [2018/07/22 18:26] (current) – [GRBL Configuration] Anders Vestergaard | ||
---|---|---|---|
Line 80: | Line 80: | ||
| $31=0 | Min spindle speed, RPM | | | $31=0 | Min spindle speed, RPM | | ||
| $32=0 | Laser mode, boolean | | | $32=0 | Laser mode, boolean | | ||
- | | $100=80.000 | X steps/mm | 80 at quartermicrostep | | + | | $100=78.740 | X steps/mm | 80 at quartermicrostep | |
- | | $101=80.000 | Y steps/mm | 80 at quartermicrostep | | + | | $101=78.740 | Y steps/mm | 80 at quartermicrostep | |
- | | $102=71.000 | Z steps/mm | 71.0 at quartermicrostep | | + | | $102=78.740 | Z steps/mm | 71.0 at quartermicrostep | |
| $110=800.000 | X Max rate, mm/min | | | $110=800.000 | X Max rate, mm/min | | ||
| $111=800.000 | Y Max rate, mm/min | | | $111=800.000 | Y Max rate, mm/min | |