Differences

This shows you the differences between two versions of the page.

--- equipment:3dprinting:vyper [2023/04/16 08:38] – [Using Octoprint] Jener Rasmussen
+++ equipment:3dprinting:vyper [2024/04/14 08:28] (current) – Octoprint decommision Morten Frederiksen
@@ Line 13: / Line 13: @@
 ====== Use ======
-The printer can either the used via an SD-card, or via Octoprint for some more advanced features.
+The printer can either be used via an SD-card, or via Octoprint for some more advanced features.
 ===== Using SD-card =====
@@ Line 24: / Line 24: @@
 Leave a name tag on the printer when in use.
-Der er pt (april 2023) ved at blive etableret Octoprint, se [[https://hal9k.slack.com/archives/C053DHT6JV8|#octoprint]] på [[infrastruktur:it-services:slack|Slack]].
 ===== Using Octoprint =====
+**Octoprint is not online and no longer maintained**
   * Cura has a standard profile for the Vyper. Cura on the [[equipment:3dprinting:3dprinterpc|3D Printing PC]] also has this profile.
@@ Line 39: / Line 39: @@
 Print status is available in the #octoprint Slack channel, along with some basic controls. Try typing "@PrintBot help".
+===== Pause at height =====
+In Cura there is an extension to insert GCode to pause at a specified height (layer number) in the print (e.g. for inserting embedded nuts or other objects), however, the [[https://github.com/ANYCUBIC-3D/Vyper/issues/16|firmware of Vyper does not support resuming after the pause]]. As a workaround it is possible to send the ''M108'' GCode command manually. e.g via the terminal in OctoPrint. (Check the connection to the printer before starting the print, to make sure you can execute the command.)
+If printing over the inserted object, it may be a good idea to preheat the object on the print bed before inserting and resuming the print.
 ====== Links ======

User Tools

Site Tools

Differences

Page Tools