Differences

This shows you the differences between two versions of the page.

--- equipment:3dprinting:vyper [2023/04/16 15:03] – Torsten Martinsen
+++ equipment:3dprinting:vyper [2024/04/14 08:28] (current) – Octoprint decommision Morten Frederiksen
@@ Line 26: / Line 26: @@
 ===== Using Octoprint =====
+**Octoprint is not online and no longer maintained**
   * Cura has a standard profile for the Vyper. Cura on the [[equipment:3dprinting:3dprinterpc|3D Printing PC]] also has this profile.
@@ Line 37: / Line 39: @@
 Print status is available in the #octoprint Slack channel, along with some basic controls. Try typing "@PrintBot help".
+===== Pause at height =====
+In Cura there is an extension to insert GCode to pause at a specified height (layer number) in the print (e.g. for inserting embedded nuts or other objects), however, the [[https://github.com/ANYCUBIC-3D/Vyper/issues/16|firmware of Vyper does not support resuming after the pause]]. As a workaround it is possible to send the ''M108'' GCode command manually. e.g via the terminal in OctoPrint. (Check the connection to the printer before starting the print, to make sure you can execute the command.)
+If printing over the inserted object, it may be a good idea to preheat the object on the print bed before inserting and resuming the print.
 ====== Links ======