Differences

This shows you the differences between two versions of the page.

--- equipment:brother800e [2020/09/16 21:44] – Jener Rasmussen
+++ equipment:brother800e [2020/11/22 16:40] (current) – Add note on tightening of fabric and backing cogi
@@ Line 47: / Line 47: @@
 . Be careful to catch the thread on the hook
+==== Tightning backing ====
+Place the backing and the fabric on the empty frame.
+{{ :undefined:img_20200922_214319.jpg?direct&400 |}}
+Tighten the frame screw such that the inner frame go in tightly. Push down the inner frame tightening the backing and fabric as a side effect.
+{{ :equipment:img_20200922_214516.jpg?direct&400 |}}
+With both hands tighten the backing and fabric by pulling outward. Use your thumbs to hold down the inner frame such that it doesn't spring out.
+{{ :equipment:img_20200922_214652.jpg?direct&400|}}{{:equipment:img_20200922_214641.jpg?direct&400 |}}
+Tighten the frame. Be warned that the backing and fabric tends to bulge a bit near the frame screw, this can be mostly avoided by not tightening the frame too much.
+Note that tightening the fabric too much will cause the embroidery to //shrink//, and tightening too little will cause it to //bulge//. When hooping the fabric and backing, aim for the backing to be tight enough to produce a drum-sound when tapping while the fabric is neither stretched nor bunched up. This should produce the best results.
 ==== Choosing boobin (bottom) thread ====
@@ Line 74: / Line 91: @@
 Repeat the instructions for the remaining satins.
+==== Reflection and color ====
+By having elements of the same color with stitching in opposite directions a pattern the plays in the light can be created. Use the "Extensions" > "Ink/Stitch" > "Params" to change the direction of a fill.
+{{ :equipment:img_20200916_212935.jpg?400 |}}
 ===== InkStitch templates =====

Hal9k's wiki

User Tools

Differences