Differences

This shows you the differences between two versions of the page.

--- equipment:lulzbot-taz [2014/04/25 10:45] – Mads Chr. Olesen
+++ equipment:lulzbot-taz [Unknown date] (current) – removed - external edit (Unknown date) 127.0.0.1
@@ Line 1: / Line 1: @@
-====== LulzBot TAZ 3 ======
-^ QR-ID    |           |
-^ Navn  | LulzBot TAZ 3 |
-^ Kort beskr.    | 3D-printer |
-^ Indehaver | HAL9k |
-^ Tovholder | [[members:mchro]], [[members:anderskvist]] |
-^ Tilladt brug | **NIX! Ikke endnu!** |
-Vi har fået doneret en [[https://www.lulzbot.com/products/lulzbot-taz-3-3d-printer|LulzBot TAZ 3]] fra LulzBot.
-**Vi er stadig ved at køre den ind, så indtil videre er det nix pille!**
-===== Improvements to be made =====
-==== Budaschnozzle 2.0 PLA Fix ====
-[[http://forum.lulzbot.com/viewtopic.php?f=7&t=158&hilit=leaking+fitting|The hot end nozzle can leak with PLA in the fitting]]. The [[https://www.lulzbot.com/support/budaschnozzle-20-pla-solution|suggested fixes]] look quite easy.
-We are going for [[https://www.lulzbot.com/support/budaschnozzle-20-pla-fix-high-temp-thread-lock-nozzle-threads|solution 2 of using thread sealant]].
-We have ordered some Loctite C5-A sealant: http://www.thansen.dk/product.asp?n=-495911439&pn=-495911264
-==== Fan Duct for PLA - DONE! ====
-http://www.thingiverse.com/thing:147966
-Printed and mounted.

Hal9k's wiki