User Tools

Site Tools

equipment:3dprinting:3dprinterpc

3DPrinterPC

QR-ID HQR1016
Navn 3DPrinterPC
Kort beskr. PC til at lave G-code filer til 3D-printerne
Indehaver HAL9k
Tovholder Anders Vestergaard
Tilladt brug No hacking allowed. Alm. brug tilladt
Placering Er monteret på border i lasersaurgrotten

Info

3Dprinter PC'en er beregnet til at slice dine STL-filer til G-code filer som 3D-printerne forstår.

Cura er installeret samt opsat til LulzBot TAZ 3 og ultimaker.

PCen kører Lubuntu – password står på skærmen.

Kiosk Mode

Settings in Cura are reset every time Cura is launched from the desktop.

  • If the default settings are incorrect, or Cura needs to be updated, ask in #3dprinter on Slack

Material must always be set to “Hal9k PLA”

  • Otherwise, retraction settings will cause blockage.
  • Use only 3 mm or less retraction distance with both printers.

The PC installs updates and reboots at 4 AM, every day.

https://github.com/Hal9k-dk/cura-kiosk

Permalink equipment/3dprinting/3dprinterpc.txt · Last modified: 2022/05/01 10:49 by Lars Christensen

oeffentlich