Differences

This shows you the differences between two versions of the page.

--- equipment:3dprinting:vyper [2023/04/15 21:02] – Jener Rasmussen
+++ equipment:3dprinting:vyper [2024/08/22 19:38] (current) – Torsten Martinsen
@@ Line 8: / Line 8: @@
 ^Lokale | Lasergrotten |
 ^Tilladt brug | No hacking allowed. Kun PLA. Leave name tag on printer when in use. |
+Se også [[equipment:3dprinting:start|3D print generelt]].
 {{ :equipment:3dprinting:vyper_9_1800x1800.png?nolink&400 |}}
@@ Line 13: / Line 15: @@
 ====== Use ======
-The printer can either the used via an SD-card, or via Octoprint for some more advanced features.
+The printer can either be used via an SD-card, or via Octoprint for some more advanced features.
 ===== Using SD-card =====
@@ Line 24: / Line 26: @@
 Leave a name tag on the printer when in use.
-Der er pt (april 2023) ved at blive etableret Octoprint, se [[https://hal9k.slack.com/archives/C053DHT6JV8|#octoprint]] på [[infrastruktur:it-services:slack|Slack]].
 ===== Using Octoprint =====
+**Octoprint is not online and no longer maintained**
   * Cura has a standard profile for the Vyper. Cura on the [[equipment:3dprinting:3dprinterpc|3D Printing PC]] also has this profile.
-  * Save the GCODE file to you machine.
+  * Save the GCODE file to your machine.
-  * Open and login to [[http://o7zqgbs43gbnyct6x2awn5qrlexqpjmg4p2pqx3rfqb5jufbsmrq.remote.moe/|Octoprint]]. The username and password can be found in [[https://hal9k.slack.com/archives/C04LLPG98|Slack]].
+  * Open and login to [[http://o7zqgbs43gbnyct6x2awn5qrlexqpjmg4p2pqx3rfqb5jufbsmrq.remote.moe/|Octoprint]]. The username and password can be found in a pinned message in the [[https://hal9k.slack.com/archives/C053DHT6JV8|#octoprint]] Slack channel.
-  * If the printer icon in the top bar is grey, pres it to turn on the printer.
+  * If the printer icon in the top bar is grey, press it to turn on the printer.
-  * On the left on "Status" click connect if the printer is not already connected.
+  * On the left under "Status" click connect if the printer is not already connected.
-  * Under the files panel on the left, click on the Upload button and upload you GCODE file,
+  * Under the files panel on the left, click on the Upload button and upload your GCODE file.
-  * Then select the file you just upload, and click on the printer icon (it has the help test "Load and Print").
+  * Then select the file you just uploaded, and click on the printer icon (it has the help text "Load and Print").
   * The printer will now warm up and begin to print.
-Print status are available in the #octoprint Slack channel, along with some basic controls. Try typing "@PrintBot help".
+Print status is available in the #octoprint Slack channel, along with some basic controls. Try typing "@PrintBot help".
+===== Pause at height =====
+In Cura there is an extension to insert GCode to pause at a specified height (layer number) in the print (e.g. for inserting embedded nuts or other objects), however, the [[https://github.com/ANYCUBIC-3D/Vyper/issues/16|firmware of Vyper does not support resuming after the pause]]. As a workaround it is possible to send the ''M108'' GCode command manually. e.g via the terminal in OctoPrint. (Check the connection to the printer before starting the print, to make sure you can execute the command.)
+If printing over the inserted object, it may be a good idea to preheat the object on the print bed before inserting and resuming the print.
 ====== Links ======

Hal9k's wiki

User Tools

Differences