This is an old revision of the document!
Anycubic Vyper
| QR-ID | HQR1097 |
|---|---|
| Navn | Anycubic Vyper |
| Kort beskr. | 3D-printer |
| Build Volume | 245mm(L)×245(W)×260mm(H) |
| Indehaver | Hal9k |
| Lokale | Lasergrotten |
| Tilladt brug | No hacking allowed. Kun PLA. Leave name tag on printer when in use. |
Use
Cura has a standard profile for the Vyper. Cura on the 3D Printing PC also has this profile.
Copy STl file to an SD card and insert the card into the printer.
Note: STL files *must* be placed in the root directory of the SD card.
Leave a name tag on the printer when in use.