This is an old revision of the document!

Anycubic Vyper

QR-ID	HQR1097
Navn	Anycubic Vyper
Kort beskr.	3D-printer
Build Volume	245mm(L)×245(W)×260mm(H)
Indehaver	Hal9k
Lokale	Lasergrotten
Tilladt brug	No hacking allowed. Kun PLA. Leave name tag on printer when in use.

Use

The printer can either the used via an SD-card, or via Octoprint for some more advanced features.

Cura has a standard profile for the Vyper. Cura on the 3D Printing PC also has this profile.

Copy GCODE file to an SD card and insert the card into the printer.

Note: GCODE files must be placed in the root directory of the SD card.

Leave a name tag on the printer when in use.

Der er pt (april 2023) ved at blive etableret Octoprint, se #octoprint på Slack.

Cura has a standard profile for the Vyper. Cura on the 3D Printing PC also has this profile.
Save the GCODE file to your machine.
Open and login to Octoprint. The username and password can be found in Slack.
If the printer icon in the top bar is grey, press it to turn on the printer.
On the left on “Status” click connect if the printer is not already connected.
Under the files panel on the left, click on the Upload button and upload your GCODE file.
Then select the file you just upload, and click on the printer icon (it has the help text “Load and Print”).
The printer will now warm up and begin to print.

Print status is available in the #octoprint Slack channel, along with some basic controls. Try typing “@PrintBot help”.