User Tools

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
projects:whitehouse-lock [2011/04/28 06:16] – created Jesper Rosenkildeprojects:whitehouse-lock [2013/04/08 15:47] (current) – external edit 127.0.0.1
Line 1: Line 1:
 +====== Whitehouse Lock ======
 +
 +=== Foreløbig indkøbsliste ===
 +  Låseblik:
 +    Abloy EL412 
 +
 +  Strøm:
 +    2x 12v lader (fra biltema)
 +    2x 12v blyakkumulator (fra biltema)
 +    Noget sikring til batteri + sikringsboks
 +
 +  Arduino:
 +    1x Arduino
 +    1x Strøm til Arduino (24v -> 5v)
 +    1x Prototyping shield til Arduino
 +
 +  Kommunikation:
 +    4x RS485 dil-pakker (MAX487) OK
 +    1x D-sub 9 hun OK
 +
 +  Dør og bipper:
 +    2x MOS-FET RFD14N05 + det løse
 +
 +  Adgangskontrol:
 +    2x RFID-læser til Arduino
 +    1x Matrix Keypad OK 
 +    2x RGB-lysdiode OK
 +    1x Bipper OK, bruger den fra nuværednde installation
 +    2x Kasse OK
 +
 +  Styring:
 +    1x Søkris net4801
 +    1x VT220 Terminal
 +    1x USB RFID
 +    1x Strømstik
 +    
 +=== RS485 communication ===
 +
 +Example implementation http://pskillenrules.blogspot.com/2009/08/arduino-and-rs485.html
 +
 +The MAX487 chip only allows half-duplex. This means that the receiver and transmitter must switch between RX and TX mode internally as well as on the enable pins on the level-converter.
 +
 +The protocol will be [[wp>Modbus|Modbus RTU]] for which many [[http://en.wikipedia.org/wiki/Modbus#Open-source_software|implementations]] exists. The server ("grisen") will be the master.
 +
 +=== Bus connection ===
 +Pin out for the [[http://en.wikipedia.org/wiki/Modular_plug#8P8C|8P8C modular plug]] socket in the server box ("Grisen").
 +
 +^**Position**^ **Use** ^ **Colour code for EIA-568-B** ^
 +|Pos. 1 | ++ (12 V dc) | Orange/white |
 +|Pos. 2 | ++ (12 V dc) | Orange |
 +|Pos. 3 | --  (Common) | Green/white |
 +|Pos. 4 | "X-"/inverting | Blue |
 +|Pos. 5 | "X+"/non-inverting | Blue/white |
 +|Pos. 6 | -- (common) | Green |
 +|pos. 7 | Not connected | Brown/white |
 +|pos. 8 | Not connected | Brown |
 +
 +The Cat5e cable going to the front door is wired by the  [[http://en.wikipedia.org/wiki/TIA/EIA-568-B#Wiring|EIA-568-B]] colour code, whereas the other cables in the structured cabling uses [[http://en.wikipedia.org/wiki/TIA/EIA-568-B#Wiring|EIA-568-A colours]].
 +
 +
 +=== Registers ===
 +The door-arduino has the following registers:
 +  1. status
 +  2. rfid
 +  ...
 +  x. pincode1-4
  

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also, you acknowledge that you have read and understand our Privacy Policy. If you do not agree, please leave the website.

More information